Kenwood DNX7200, Instruction Manual, Page: 39 / 282

DNX7200 GPS Navigation Instruction Manual EN-
a
PPendix
English
Custom POIs �Points of Interest�
You can manually load custom points of interest (POI)
databases, available from various companies on the
Internet. Some custom POI databases contain alert
information for points such as safety cameras and school
zones. The unit can notify you when you approach one
of these points.
After downloading your POI database, use the Garmin
POI Loader to install the POIs onto an SD card. Then,
you can use the SD card to load the POIs into the
DNX7200. The POI Loader is available at
www.garmin.com/products/poiloader. Refer to the POI
Loader Help file for more information; press F1 to open
the Help file.
CAUTION: Garmin is not responsible for the
consequences of using a custom POI database or
the accuracy of the safety camera or other custom
POI database.
Adjusting the Proximity Alerts
To turn on or off the proximity alerts for custom POIs,
open the Menu page and touch Settings > General >
proximity Alerts .
Audio Notifications
—turn off or on the alerts that sound
as you approach a custom POI.
Visual Notification —turn off or on the pop-up alerts
that appear as you approach a custom POI.
Continuous Notification —select which alerts (which
types of POIs) you will be continually notified of.
190-00771-00_0A.indb 31 1/10/2007 3:08:59 PM