Kenwood DNX573S, Quick Start Manual

Page: 30 / 190

28
Installation
Ñ
Connecting a USB device
iPod/
iPhone
USB device [2]
USB device [2]
USB terminal [1] (1 m)
DNX893S/ DNX7160BTS/
DNX693S/ DNX5160BTS
DNX773S/
DNX573S
[1] iPod/iPhone / USB maximum power supply current :
DC 5 V
=
1.5 A
[2] Sold separately / Use CA-U1EX to extend the cable if
necessary. (Max 500 mA, 5V)
iPod/iPhone / USB terminal [1] (1 m)
iPod/iPhone terminal
[1]
(1 m)
Accessory
2
Wireless Display Adapter: KCA-WL100
(Sold separately)
Ñ Connecting the Wireless Display Adapter to
use smartphone/iPod/iPhone over a wireless
connection
iPod/
iPhone
✎
NOTE
• When you connect iPod/iPhone with HDMI cable, the
necessary cable differs depended on the type of the
connecter like Lightning or 30-pin. Refer to “Connecting
iPod/iPhone”
(P.13)
for the necessary cable.
• The setting is necessary to meet the connected iPod/
iPhone or Android device. Refer to “Selecting the
Android/ iPod/ iPhone device to play and connection
method”
(P.13)
.
KCA-HD100
(1.8 m) [3]
KCA-iP103 (0.8m) [3]
KCA-iP103 (0.8m) [3]
Lightning Digital AV
Adapter
[2]
iPod/iPhone [2]
iPhone (with CarPlay) [2]
[1] iPod/iPhone maximum power supply current :
DC 5 V
=
1.5 A
[2] Sold separately
[3] Optional accessory
iPod/iPhone terminal
[1]
(1 m)
Ñ
Connecting an iPod/iPhone
Accessory
2
⿠
Lightning connector
iPod/
iPhone
KCA-iP102 (0.8m) [3]
iPod/iPhone terminal
[1]
(1 m)
iPod [2]
Accessory
2
⿠
30-pin connector