Connection/Installation
83
English
#
CAUTION
When installing the antenna cable
inside a front pillar that contains an air
bag
• The front pillar cover is secured with a special clip
which may need to be replaced when the front pillar
cover is removed.
Contact your vehicle dealer for details on replacing
the front pillar cover and availability of replacement
parts.
Clip
Front pillar cover
• Install the amplifier unit (accessory
@
) above the air
bag so that the antenna and the air bag.
Air bag
@
Front pillar
●
Determining the antenna installation
location
1) Remove the front pillar cover of your car.
Front pillar cover
2) Clean the windscreen with the supplied
cleaner (accessory
~
).
~
• Wait until the glass surface is completely
dry before pasting.
• If the glass surface is cold, such as during
winter, warm it with defroster or dryer.
3) Remove the first sheet (tag 1) of film antenna
(accessory
!
) horizontally and paste the
antenna on the front glass.
Sheet (tag 1)
!
• Do not touch the pasting surface (adhesive
side) of the film antenna (accessory
!
).
4) Rub the film antenna (accessory
!
) gently
in the direction of the arrow shown below to
firmly stick it to the windscreen.
!B5A-2484-00_18DNX_M_En.indb 83
2018/02/19 20:36