Kenwood DNX4310DAB Instruction Manual Download Page 50 | Manualshive

Page: 50 / 55

background image

98

98

99

Return to the Top page

Return to the Top page

Connectable iPod/iPhone

The following models can be connected to
this unit.
You can control an iPod/iPhone from this unit
by connecting an iPod/iPhone (commercial
product) with Dock connector using an
optional accessory iPod connection cable
(KCA-iP202/KCA-iP22F). The word “iPod”
appearing in this manual indicates the iPod/
iPhone connected with the KCA-iP202/KCA-
iP22F (optional accessory).

Made for
•  iPod nano (6th generation)
•  iPod nano (5th generation)
•  iPod nano (4th generation)
•  iPod nano (3rd generation)
•  iPod with video
•  iPod classic
•  iPod touch (4th generation)
•  iPod touch (3rd generation)
•  iPod touch (2nd generation)
•  iPod touch (1st generation)
•  iPhone 4S
•  iPhone 4
•  iPhone 3GS
•  iPhone 3G

• iPhone

NOTE

• For the conformity information on iPod/iPhone

software,
access

www.kenwood.com/cs/ce/ipod/

.

• By connecting your iPod/iPhone to this unit with

an optional accessory iPod connection cable
(KCA-iP202/KCA-iP22F), you can supply power
to your iPod/iPhone as well as charge it while
playing music. However, the power of this unit
must be on.

• If you start playback after connecting the iPod,

the music that has been played by the iPod is
played first.
In this case, “Reading” is displayed without
displaying a folder name, etc. Changing the
browse item will display a correct title, etc.

• When the iPod is connected to this unit,

“KENWOOD” or “

✓

” is displayed on the iPod to

indicate that you cannot operate the iPod.

Usable USB device

You can use a mass-storage-class USB device
on this unit.
The word “USB device” appearing in this
manual indicates a flash memory device and
digital audio players can be recognized as
mass-storage.

■

About file system

The file system should be the one of the following.
• FAT16
• FAT32

NOTE

• When the USB device is connected to this unit, it

can be charged through the USB cable.

• Install the USB device in the place where it will

not affect safe driving.

• You cannot connect a USB device via a USB hub

and Multi Card Reader.

• Take backups of the audio files used with this

unit. The files can be erased depending on the
operating conditions of the USB device.
We shall have no compensation for any damage
arising from any erased data.

• No USB device comes with this unit. You need to

purchase a commercially available USB device.

• When connecting the USB device, usage of the

CA-U1EX (option) is recommended. (However,
maximum supply current of CA-U1EX is 500mA.)
Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.

■

General

ATT

The attenuator is active.

DUAL

The dual zone function is on.

TEL

Indicates the connection state of the Bluetooth

hands-free unit.

• White: Connected

• Orange: Not connected

LOUD

The loudness control function is on.

■

DVD/CD

FO-REP

Folder repeat function is on.

IN

A disc is inserted.

• White: A Disc is inside the unit.

• Orange: Error at the disc player

VIDEO

Identifies the video file.

MUSIC

Identifies the music file.

RDM

The random function is on.

REP

The repeat function is on.

C-REP

The chapter repeat function is on.

T-REP

The title repeat function is on.

■

VCD

1chLL/2chLL

Identifies the left audio output of channel 1

or 2.

1chLR/2chLR

Identifies the monaural audio output of

channel 1 or 2.

1chRR/2chRR

Identifies the right audio output of channel 1

or 2.

1chST/2chST

Identifies the stereo audio output of channel

1 or 2.

LL

Identifies the left audio output.

LR

Identifies the monaural audio output.

RR

Identifies the right audio output.

STEREO

Identifies the stereo audio output.

PBC

The PBC function is on.

SVCD

Identifies the Super Video CD.

VER1

The VCD version is 1.

VER2

The VCD version is 2.

REP

The repeat function is on.

Status Bar Indicator Items

Shown below is a list of indicators displayed on the status bar in the screen.
Current status of this unit is displayed on the bar.

Status bar

«
...
48
49
50
51
52
...
»

Summary of Contents for DNX4310DAB
























































Reviews:

No comments

Related manuals for DNX4310DAB

Quarantine Warden

Brand: Comarch Pages: 6

Brand: Holux Pages: 16

AssetTrac AT0303KE

Brand: NovaTracker Pages: 17

Brand: WhereSafe Pages: 3

Brand: Garmin Pages: 2

Brand: Garmin Pages: 132

Brand: FCC Pages: 6

Brand: ALASKA Pages: 29

Geko 301 - Hiking GPS Receiver

Brand: Garmin Pages: 68

StarFinder Aire

Brand: Laipac Pages: 41

Prophet SiRF III

Brand: XAiOX Pages: 15

Brand: Black Box Pages: 2

Brand: Polstar Pages: 58

Brand: Kogan Pages: 45

Brand: Micron Electronics Pages: 9

Brand: Standard Horizon Pages: 100

Brand: Garmin Pages: 9

Brand: J. W. Davis & Company Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands