Kenwood DNX4310DAB Instruction Manual Download Page 48

Page: 48 / 55

Return to the Top page

Troubleshooting

Return to the Top page

Troubleshooting

Error Message

Cause

Solution

USB Device

Error!!

The connected USB device is rated

a current capacity higher than the

allowable limit.

Check the USB device. Some trouble may have

occurred to the connected USB device.
Change the source to any source other than

USB. Remove the USB device.

Authorization

Error

Connection to the iPod has failed.

• Remove the iPod and then reconnect it.
• The unit does not support the iPod.

See

Connectable iPod/iPhone (P.98)

Update your

iPod

The iPod’s software is an older

version which the unit can not

support.

The unit may not support the connected iPod

model.
Confirm that the software for the iPod is the

latest version.

See

Connectable iPod/iPhone (P.98)

Navigation

Error. Please

turn on power

again later.

The communication error has

occurred due to severely cold

temperature.

Turn on power again after warming your car

interior.

Resetting The Unit

If the unit or the connected unit fails to operate properly, reset the unit.

Press the <Reset> button.

The unit returns to factory settings.

NOTE

• Disconnect the USB device before pressing the <Reset> button. Pressing the <Reset> button with the USB device

connected can damage the data stored in the USB device. For how to disconnect the USB device, see

How To

Play Media (P.13)

• When the unit is turned on after resetting, the Initial SETUP screen appears. See

Initial setup (P.11)

Summary of Contents for DNX4310DAB
























































Search results

Summary of Contents for DNX4310DAB

Reviews:

Related manuals for DNX4310DAB

Brands by name

Popular brands

Kenwood DNX4310DAB, Instruction Manual

Search results

Summary of Contents for DNX4310DAB

Reviews:

Related manuals for DNX4310DAB

Brands by name

Popular brands