Chapter
8
General FAQ’s
How to Dim the Display
Note:
this adjustment needs to be carried out separately for navigation and each source
•
Press
the
[SCRN]
button
•
Then set the
[Dimmer]
option to
OFF
o
Set up the brightness, contrast and black level controls to the desired level for daylight
conditions
Note:
in some sources, such as video, it is also possible to adjust colour, tint and sharpness
•
Set
the
[Dimmer]
to
ON
o
Set up the same controls for night time driving
•
Set
the
[Dimmer]
to either ‘SYNC’ or ‘NAV-SYNC’ – this determines when the screen will switch to
night mode.
SYNC
= when the car’s lights are turned on
NAV-SYNC
= at sunset
What to do with a Blank Screen
If the screen has gone blank, but the buttons are still illuminated and sound continues to play, then try holding
down the
[TEL]
button for about a second. This operation switches the screen off or on
It is also possible to get a blank screen if you select
[VIDEO]
from the Top Menu: selecting this source
switches to the video input, but if there is no video signal present, then you will get a blank screen – in this
case, just press the
[Menu]
button and select another source.
If the screen has gone blank, but also button illumination has switched off and there is no sound playing (i.e.
system has switched off) – it is possible that the system has been manually turned off by holding down the
[Menu]
button. If you do this, you will need to manually turn the system back on by pushing the
[Menu]
button
once (with the ignition on).
If all else fails please try pressing the reset button (you need a pen for this)
The reset button on the DNX4210BT/DAB is the red illuminated triangle.
Unable to Enter a Postcode for Wales or Scotland but English
Postcodes are OK
Press
[NAV]
, then press
[Where To?]
>
[Address]
>
[Change Country]
– change the country to ‘
United
Kingdom
’
My iPod Icon has Disappeared from the Top Menu, Instead I have
Video 1 and Video 2 Icons
Disconnect the iPod from the system
Press
[Menu]
>
[Standby]
>
[SETUP]
>
[Source]
>
[AV IN SET-UP]
Change the setting called
“iPod AV Interface Use”
to
“iPod”
22
