Kenwood DNX4210BT-OP Easy Setup Manual Download

Page: 21 / 24

iPod/iPhone

iPod/iPhone Compatibility

The following iPod/iPhone’s are compatible with your Kenwood Navigation System:

NOTES:

Kenwood iPod lead will be required as Apple’s White USB cable will not work.

iPod Model

Generation

iPod Nano

1st / 2nd / 3rd / 4th / 5th / 6th / 7th

iPod Classic

6th – (80G, 120G & 160G)

iPod Touch

1st / 2nd / 3rd / 4th / 5th

iPod Video

5th / 6th

iPhone

Model

iPhone

3G / 3GS/ 4 / 4S / 5

How to Connect Up an iPhone 5

Apple has changed the 30-pin connector used on earlier models of the iPhone to a Lightning connector
used on the iPhone 5. Therefore to connect your iPhone 5 to the iPod lead of the Kenwood Navigation
System you will require Apple’s

“Lightning Adapter”

, available from your nearest Apple Store

Video Playback Will Not Work via an iPhone 5

The iPhone 5 does not support video output to 3

party devices.

No iPod/iPhone Loading

Make sure you have selected

[iPOD]

on the

[TOP MENU]

rather than “USB”.

iPod/iPhone Music Playback Not Working

If you have connected your iPod/iPhone via Kenwood’s iPod lead and
it will not work please do a

“RESET”

on the iPod/iPhone and also a

“RESET”

on the Kenwood Navigation System and then reconnect.

Chapter

[RESET]

button –

Press and hold for a
few seconds

NOTE:

When doing a reset on the Kenwood Navigation System you will lose any presets radio stations

Summary of Contents for DNX4210BT-OP

























Search results

Summary of Contents for DNX4210BT-OP

Reviews:

Related manuals for DNX4210BT-OP

Brands by name

Popular brands

Kenwood DNX4210BT-OP, Easy Setup Manual

Search results

Summary of Contents for DNX4210BT-OP

Reviews:

Related manuals for DNX4210BT-OP

Brands by name

Popular brands