Kenwood DNX317BTS, Instruction Manual

Page: 72 / 101

Controlling Audio
72
■
Initialize
The current EQ curve returns to flat.
■
ALL SRC
Apply the adjusted equalizer to all sources.
Touch
[
ALL SRC
]
and then touch
[
OK
]
on the
confirmation screen.
■
Bass EXT (Bass Extend Settings)
When turned on, the frequency lower than
62.5 Hz is set to the same gain level as 62.5
Hz.
■
SW Level ( )
Adjusts the subwoofer volume. This setting
is not available when subwoofer is set to
“None”. See
Speaker/ X’over setup (P.69)
.
Ñ
Recall the EQ curve
1
Touch
[
Preset Select
]
.
2
Select EQ curve.
NOTE
•
[
iPod
]
is available only during iPod source.
Ñ
Save the EQ curve
1
Adjust the EQ curve.
2
Touch
[
Memory
]
.
3
Select where to save.
Volume Offset
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
1
Press the
[
MENU
]
button.
h Popup menu appears.
2
Touch
[
Audio
]
.
h
Audio screen appears.
3
Touch
[
Volume Offset
]
.
4
Touch
[
+
]
or
[
−
]
to adjust the level.
■
Initialize
Returns to the initial settings.
* If you have increased the volume first, then
reduced the volume using the “Volume
Offset”, the sound generated if you suddenly
switch to another source may be extremely
loud.