Kenwood DNR3190BTS, Instruction Manual

Page: 70 / 117

Other External Components
69
English
Other External Components
View Camera
NOTE
• To connect a camera, see
P.99
.
• To use a rear view camera, a REVERSE lead
connection is required.
(P.97)
• If
[
Rear Camera Interruption
]
is active the
camera screen is displayed when you shift the
gear to the reverse (R) position.
Ñ
Display the camera screen
1
Press the
[
MENU
]
/
[ ]
button.
h h Popup menu appears.
2
Touch
[
Camera
]
.
h h View camera screen appears.
3
Adjust each item as follows.
To erase the caution message, touch the
screen.
2
3
4
1
1
Switching the View Camera *
1
Touch to display the camera switching keys.
It is necessary to set “Camera Assignment
Settings” beforehand. See
To switch the view
camera (P.69)
.
2
Camera off
Touch to exit the camera screen.
3
Switching the Guideline *
2
Touching each time turns on or off the
guideline.
4
Switching the Angle *
2
Touching each time changes camera angles.
*1 When two or more cameras of rear, front, left,
and right are connected with this unit.
*2 When CMOS-3xx series is connected with
this unit.
To switch the view camera
1
Touch
[
1
]
.
h h Camera switching keys appear left/right
side.
2
Select a view camera you want to switch.
NOTE
• To switch to the picture other than selectable
view camera from the camera switching keys,
change the key function of except “Rear” in
[
Camera Assignment Settings
]
.
(P.70)
Ñ
Camera Setup
1
Press the
[
MENU
]
/
[ ]
button.
h h Popup menu appears.
2
Touch
[
SETUP
]
.
h h SETUP Menu screen appears.
3
Touch
[
Camera
]
.
h h Camera screen appears.
Autogoods “130”
130.com.ua