Kenwood DMX908S, Instruction Manual

Page: 73 / 106

Setup
73
English
AV Setup
You can set AV parameters.
1
Press the
[
MENU
]
button.
h h Popup menu appears.
2
Touch
[
SETUP
]
.
h h
SETUP screen appears.
3
Touch
[
AV
]
.
h h
AV screen appears.
4
Set each parameter as follows.
■ [
Guidance/Voice Recognition Volume
]
Adjust the volume of the guidance and voice
recognition in Apple CarPlay/Android Auto
mode. Default is "19".
■ [
Incoming Call Volume (Ring)
]
Adjust the ring tone volume in Apple
CarPlay/Android Auto mode. Default is "15".
■ [
In Call Volume (Talking)
]
Adjust the dial tone volume and the volume
during a call in Apple CarPlay/Android Auto
mode. Default is "15".
■ [
Speech Quality Adjust
]
Adjust the speech quality.
[
Microphone Level
]
: Adjust the level of
microphone gain. Default is “0”.
[
Echo Cancel Level
]
: Adjust the level of
echo cancellation. Default is “0”.
[
Noise Reduction Level
]
: Reduce the
noise generated in the surrounding
environment without changing the
microphone volume. Use this function
when the voice of caller is not clear.
Default is “0”.
■ [
iPod Bluetooth Connection
]
See Select the method of making
connections for outputting sound from
the iPod source (P.29)
.
■ [
Driving Position
]
Select the driving position (left or right).
“Left” (Default)/“Right”
■ [
Reverse with ATT
]
Select whether to decrease the audio volume
automatically when the gear is shifted to the
reverse (R) position. Default is "ON".
■
[
Maestro SETUP
]
Confirm the information about or change the
settings for using the iDatalink (commercially
available).
■
[
Vehicle Features
]
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
Connection Setup
NOTE
• Some items in the Connection Setup are disabled
while using Apple CarPlay.
1
Press the
[
MENU
]
button.
h h
Popup menu appears.
2
Touch
[
SETUP
]
.
h h SETUP Menu screen appears.
3
Touch
[
Connection
]
.
h h Connection Setup screen appears.
4
Set each parameter as follows.
■
[
Bluetooth
]
Turns the Bluetooth function on or off.
■ [
Device List
]
Select the connected device to be used.
(P.53)
■ [
Device Name
]
If you select ON for Bluetooth, you can
change the Bluetooth device name.
See
Change the device name for Bluetooth
(P.74) .
■ [
PIN Code
]
You can change the PIN Code. See Change
the PIN Code (P.74) .
■ [
Device Address
]
Display the Bluetooth device address.