Kenwood DMX8018S, Instruction Manual

Page: 38 / 72

Other External Components
38
■ [
Dashboard Camera /Front Camera
]
[
Dashboard Camera
]
: Select this when the
dashboard camera is connected.
[
CMOS 3-Series Camera
]
: Select this when
the CMOS-3xx series with ID 2 ("Front
Camera") set is connected.
[
Other
]
: Select this when the other camera is
connected.
[
OFF
] (Default): Select this when no camera is
connected.
■ [
Front Camera Settings
]
If you select
[
CMOS 3-Series Camera
]
for
[
Dashboard Camera /Front Camera
] ,
adjusts the CMOS-3xx series with ID 2 ("Front
Camera") set. For details, see the instruction
manual of your camera.
■ [
Front Camera Mirror Image
]
If you select
[
Other
]
for
[
Dashboard
Camera /Front Camera
]
.
[
ON
]
: Displays the picture from the front view
camera horizontally reversed.
[
OFF
]
(Default): Displays the picture from the
front view camera as it is.
To adjust the parking guidelines
NOTE
• Install the rear view camera in the appropriate
position according to the instructions supplied
with the rear view camera.
• When adjusting the parking guidelines, make
sure to use the parking brake to prevent the car
from moving.
1
Touch
[
ON
]
of
[
Parking Guidelines
]
in the
Camera screen. (P.37)
2
Touch
[
Guidelines SETUP
]
in the Camera
screen.
3
Adjust the parking guidelines by
selecting the
mark.
4
Adjusting the position of the selected
mark.
A
B
C
D
Make sure that
A
and
B
are horizontally
parallel, and that
C
and
D
are the same
length.
NOTE
• Touch
[
Initialise
]
and after touch
[
Yes
]
to set all
the marks to the initial default position.
!B5A-2302-00b_DDX_X_En.indb 38 2019/04/26 10:41