Kenwood DDX8020S, Instruction Manual

Page: 71 / 116

Setup
71
English
User Interface Setup
You can setup user interface parameters.
1
Press the
[
MENU
]
button.
h h Popup menu appears.
2
Touch
[
SETUP
]
.
h h
SETUP screen appears.
3
Touch
[
User Interface
]
.
h h User Interface screen appears.
4
Set each parameter as follows.
■ [
Small Audio Text
]
Change the text size for the source control
screen.
[
ON
]
(Default): Change the text size smaller.
[
OFF
]
: Cancel.
■ [
Steering Remote Controller
]
Sets the desired function in the steering
remote controller.
See
Learning function of steering remote .
(P.72)
■ [
Beep
]
Turn the key touch tone on or off.
Default is “ON”.
■
[
Widget SETUP
]
Set up the widget displayed on the Home
screen.
(P.24)
■ [
Gesture Control
]
*
1
Select to be on or off the Gesture Control.
(P.73)
Default is “ON”.
■ [
Gesture Beep
]
*
1
The beep comes out when a gesture is
detected.
Default is “ON”.
■ [
Gesture SETUP
]
*
1
Assign the functions or sources/screens to
display for gesture control.
(P.73)
■
[
Gesture Sensitivity
]
* 1
If you have selected
[
OFF
]
for
[
Gesture
Control
] , adjust the detection range of the
Gesture Control from “1”(short) to “12”(long).
Default is “7”.
■ [
Language Select
]
Select a language.
■ [
Touch Panel Adjust
]
(DDX8020S / DMX8020S)
Adjust the sensing position of the touch
panel.
(P.72)
■ [
Time Format
]
Select the time display format.
"12-Hour" (Default)/"24-Hour"
■ [
Clock
]
DDX9020DABS / DDX920WDABS /
DMX8520DABS
[
GPS-SYNC
]
(Default) : Synchronizes the clock
time with the GPS.
[
Manual
]
: Set the clock manually.
DDX8020S / DDX820WS / DMX8020S /
DMX820WS
[
RDS-SYNC
] (Default) : Synchronizes the clock
time with the RDS.
[
Manual
]
: Set the clock manually.
■ [
Time Zone
]
Select the time zone.
■ [
Clock Adjust
]
If you select
[
Manual
]
for Clock, adjust the
date and time manually. (P.72)
*1 DDX920WDABS only