Kenwood DDX8020S, Instruction Manual

Page: 48 / 116

Radio
48
Traffic Information (FM only)
You can listen and watch the traffic
information automatically when a traffic
bulletin starts. However, this feature requires
a Radio Data System that includes the TI
information.
1
Touch
[
TI
]
.
h h
Traffic information mode is set.
Ñ
When the traffic bulletin starts
The Traffic Information screen appears
automatically.
NOTE
• It is necessary to have Traffic Information function
set to on in order to have the Traffic Information
screen appear automatically.
• The volume setting during reception of traffic
information is automatically stored. The next time
the traffic information is received, this unit recalls
the volume setting automatically.
• To cancel Traffic Information: Touch
[
Cancel
]
.
Radio Setup
You can set tuner related parameters.
1
Touch
[ ]
.
h h Radio Setup screen appears.
2
Set each item as follows.
■ [
NEWS
]
(FM only)
Sets a news bulletin interrupt time. Default
is “OFF”.
■ [
AF
]
(FM only)
When station reception is poor, automatically
switches to the station that is broadcasting
the same program over the same Radio Data
System network. Default is “OFF”.
■ [
Regional
]
(FM only)
Sets whether to switch to the station only
in the specific region using the “AF” control.
Default is “OFF”.
■ [
LO.S
]
(FM only)
Turns the Local Seek function on or off.
■ [
Auto TP Seek
]
(FM only)
When traffic information station reception is
poor, automatically searches for a station that
can be received better. Default is “ON”.
■ [
Language Select
]
(FM only)
Selects a display language for the PTY
function.
■ [
Aerial Control
]
Allows you to turn off the Radio Data System
function to prevent the motor-driven
antenna from extending. Default is “ON”.