32
The oven door
has a sealed
gasket in the
top part .
It is normal to see a gap between the
top edge of the inner glass and the
sealed gasket . This allows the cooling
air circulation .
TOP OVEN DOOR
REPLACING THE INNER PANE OF
GLASS
1 . Make sure the door is locked open
(see fig. 8.4c).
2 . Replace the inner pane:
•
Check that the four rubber pads are in
place (“
D
” in fig. 8.6a).
IMPORTANT:
It is advisable, while
refitting the glass, to keep pressed in
position the four rubber pads “
D
”, by a
finger, to avoid breakage or slippage of
the rubber pads themselves (fig.
8 .6b) .
•
Check that you are holding the pane
the correct way . You should be able to
read the wording on it as it faces you .
•
Insert the pane in the left “
E
”
and right
“
F
” slide guides (fig. 8.6b), and gently
slide it to the retainers “
H
” (fig. 8.6c).
•
Reassemble the seal “
G
” in the correct
way (fig. 8.6d) by hooking the no. 3
fixing hooks in the proper holes (fig.
8 .6e) .
•
Unlock the oven door by opening it
completely and closing the lever “
A
”
on the left and right hinges (fig. 8.6f).
G
H
D
A
Fig. 8.6f
Fig. 8.6e
Fig. 8.6c
Fig. 8.6a
Fig. 8.6b
Fig. 8.6d
F
E
Summary of Contents for CK 235 C SL
Page 43: ...43 ...
