before plugging in
l
Make sure your electricity supply is
the same as the one shown on the
underside of the appliance.
l
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first
time
l
Wash the parts: see ‘care and
cleaning’.
key
blender
filler cap
locking lid
goblet
blender sealing ring
blender blade unit
power unit
cord storage
speed + pulse control
multi mill (if supplied)
multi mill jar
multi mill sealing ring
multi mill blade unit
grinding mill (if supplied)
mill lid
grinding mill blade assembly
to use your blender
Use your blender for soups, drinks,
pâtés, mayonnaise, breadcrumbs,
biscuit crumbs, chopping nuts and
crushing ice.
1 Fit the blender sealing ring
into
the blender blade unit
-
ensuring the seal is located
correctly in the grooved area.
l
Leaking will occur if the seal
is damaged or incorrectly
fitted.
2 Screw the blade assembly onto
the goblet – ensuring the blade
assembly is fully tightened
.
Refer to the graphics on the
underside of the blade unit as
follows:
- unlocked position
- locked position
3 Put your ingredients into the
goblet.
4 Put the filler cap in the lid.
5 Fit the lid to the goblet and turn
clockwise to lock.
6 Place the blender onto the power
unit with the handle situated to the
right hand side and lock by turning
clockwise until you hear a “click”
.
l
The appliance won’t work if
the blender is incorrectly
fitted.
7 Select a speed (refer to the
recommended usage chart).
4
l
Only use the appliance for its intended
domestic use. Kenwood will not accept
any liability if the appliance is subject to
improper use, or failure to comply with
these instructions.
