Kenwood BL710 series, Instructions Manual

Page: 6 / 133

●
Only use the goblet with the
blade assembly supplied.
●
Never let the power unit, cord or
plug get wet.
●
Never use a damaged
appliance. Get it checked or
repaired: see ‘service and
customer care’.
●
Never use an unauthorised
attachment.
●
Never leave the appliance
unattended when it is operating.
●
When removing the blender or
mill from the power unit:
● ●
wait until the blades have
completely stopped;
● ●
don’t accidentally unscrew
the goblet or mill jar from the
blade assembly.
●
Never run the blender empty.
●
Never blend more than the
maximum capacity stated in the
recommended speed chart.
●
To ensure long life of your
blender, do not run it for longer
than 60 seconds or the mill for
longer than 30 seconds.
●
Smoothie recipes - never blend
frozen ingredients that have
formed a solid mass during
freezing, break it up before
adding to the goblet.
●
Don’t use the blender as a
storage container. Keep it empty
before and after use.
●
Always use the blender on a
secure, dry level surface.
●
Never place this appliance on or
near a hot gas or electric burner
or where it could touch a heated
appliance.
●
Misuse of your blender can
result in injury.
●
This appliance is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities,
or lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use of the
appliance by a person
responsible for their safety.
●
Children should be supervised
to ensure that they do not play
with the appliance.
●
Only use the appliance for its
intended domestic use.
Kenwood will not accept any
liability if the appliance is subject
to improper use, or failure to
comply with these instructions.
●
The maximum rating is based
on the attachment that draws
the greatest load. Other
attachments may draw less
power.
before plugging in
●
Make sure your electricity supply
is the same as the one shown
on the underside of the
appliance.
●
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility
and EC regulation no.
1935/2004 of 27/10/2004 on
materials intended for contact
with food.
key
blender
filler cap
lid
goblet
sealing ring
blade unit
base
cord storage
speed + pulse control
power unit
vents
mill (if supplied)
mill jar
mill lid
3