Kenwood BL530 Series, Manual

Page: 6 / 69

to use your mill
1 Put your ingredients into the jar. Fill it
no more than half full.
2 Fit the sealing ring into the blade
unit.
3 Turn the blade unit upside down.
Lower it into the jar, blades down.
4 Screw the blade unit onto the jar
until it’s finger-tight.
5 Place the mill onto the power unit
and turn to lock.
6 Select a speed or use the pulse
control.
7 After milling, you can replace the
blade unit with the sprinkler lid and
shake out your food.
●
The sprinkler lid is not airtight.
cleaning
●
Always switch off, unplug and
dismantle before cleaning.
●
Never let the power unit, cord or
plug get wet.
●
Empty the goblet before unscrewing
it from the blade unit.
●
The glass goblet can be washed in
your dishwasher.
power unit
●
Wipe with a damp cloth, then dry.
●
Push excess cord inside the back of
the machine.
blade unit
1 Remove and wash the sealing ring.
2 Don’t touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don’t immerse the blade
unit in water.
3 Leave to dry upside down, away
from children.
lid
●
Remove the seal using the tab C
before cleaning the lid.
●
Wash both parts by hand, then dry.
other parts
Wash by hand, then dry.
service and customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised Kenwood
repairer.
If you need help with:
●
using your machine or
●
servicing, spare parts or repairs
Contact the shop where you bought
your machine.
4