8.8. Kentix IO-Modules
The AlarmManager-PRO can be extended by additional digital Inputs and Outputs via special Expansion
modules. For this 2 external modules (KIO7052 with 8 digital Inputs / Outputs and KIO7053 with 16 digital
Inputs) are available.
Both modules are configured via a Web browser and are queried by the AlarmManager over the network.
Commissioning and Configuration
Depending on the module type it can be powered via PoE or with an external power supply. Using a power
supply it is necessary to regard the information in the data sheet, or only to use a power supply delivered by
Kentix. Information for the wiring of the In- and Outputs can also be found in the data sheet.
No
Step
Comment
1
Connect the network port E1 to a network switch with PoE support. Connect
your PC to this switch respectively establish a network connection.
If you use a switch without PoE establish power
supply via the connectors (R)+Vs and (B)-GND.
Use the supplied power adapter-cable.
2
Open the Web-Interface of the module via the default IP
192.168.255.1
and
change the IP-settings in „Network Settings“ to your required settings.
Default username and password: Admin/Admin
In the section „Web HMI“ the Inputs and
Outputs of the module can be monitored for
test purposes.
3
Connect to the AlarmManagers web interface and add a new IO module via
the dashboard.
Select the module type and set the configured
IP-address.
4
Proceed with the setup for the wired external Inputs:
Enter a name for the alarming and choose alarm assignment and the alarm
logic. Eventually enter another alarm delay (default 1 sec.). Also select an
alarm zone for every used input.
In the module KIO7052 for each alarming state
one of the 8 outputs is switched. The type of
alarm can be assigned free (s. data sheet for
alarm types).
5
Save the configuration. After this the settings are directly active.
Each active input will be listed up in the
dashboard with its state.
Page
(07-2018, subject to change)
kentix.com
50
Terminal assignment KIO7052
Terminal assignment KIO7053
Al
a
rm
si
re
n
Accessories
