8.4. Kentix Power-Adapter (KIO2) for powering a MultiSensor
The Kentix I/O Power-Adapter KIO2 is used to expand your Kentix solution by offering the following features:
• Connection of a MultiSensor-RF/-LAN/-LAN-RF for a separate power supplying
The adapter is directly connected to the Kentix system jack and offers the possibility to supply power for one
MultiSensor via an external power supply.
This can be necessary e.g. if no PoE-Switch is available for the operation of a MultiSensor-LAN/-LAN-RF or
when a MultiSensor-RF shall be connected separately to monitor the external power.
The cable length between MultiSensor and the KIO1 adapter should not exceed 50 meters.
Figure 1: Back view of Kentix Power-Adapter (KIO2)
Page
(07-2018, subject to change)
kentix.com
46
NOTE!
This adapter can only be used for the power supply of one MultiSensors. The alarm inputs and outputs are not
available when this adapter is used.
Po
w
e
r-Ad
a
p
te
r
Accessories
