Using This Manual
The following sections provide instructions for installing, testing and troubleshooting the Sigma A-CP
Fire Control Panel:
Section 1
Introduction provides document conventions, the technical help-line, repair and return
information.
Section 2
Overview provides a summary features of the Sigma A-CP Fire Control Panel.
Section 3
Installation describes how to setup, install, test and troubleshoot the Sigma A-CP Fire
Control Panel.
Section 4
Operation describes how to open security functions for Access Level 2 or Access Level 3,
identify Alarm Conditions, Controls and Indicators, understand Relay Contacts and how to
Configure Ancillary Circuit Boards.
Section 5
Maintenance and Repair describes how to maintain and repair the Sigma A-CP Fire Control
Panel.
Appendix A
Specifications provide characteristics of the Sigma A-CP Fire Control Panel.
Appendix B
Equipment List provides model numbers for Kentec Sigma A-CP Fire Control Panels, loop
devices, accessories, replacement parts and compatible Notification Appliances.
Appendix C
Calculations provides calculations for determining load capacity, battery rating, and wiring
length of the Sigma A-CP Fire Control Panel.
Appendix D
Operating Instructions provides an overview of Sigma A-CP Fire Control Panel status and
control instructions.
www.acornfiresecurity.com
www.acornfiresecurity.com
