Kennell LTC2-A1202, User Manual

Page: 32 / 40

24
command message, the camera does not
return confirmation / completion / error
messages.
HALF-DUPLEX-2: RS-485 half duplex mode,
in VISCA protocol, after executing the
command message, the camera return
confirmation / completion / error messages.
Status
It displays current camera’s address, protocol,
baud rate, video format and firmware version
number.
Restore Defaults
RESTORE DEFAULTS option is used to reset
all menus to default value. Press OK to
confirm or press

to cancel and return to
previous menu.
< STATUS>
ADDRESS 1
PROTOCOL VISCA
BAUD RATE 2400
FORMAT 1080P50
MOUNT STAND
FIRMWARE V1.1.1
< RESTORE DEFAULTS>
PRESS OK CONFIRM
PRESS BACK CANCEL
BACK