Kenmore KM1000, Installation Manual, Page: 48 / 68

Installing Your Water Optimizer
Installing Your Water Optimizer
2-46
Installing Filters
Please note, only the INTERNAL filter ( ) is required for the appliance to
function. However, this special edition comes with an additional EXTERNAL filter
( Particle ) that will, in many cases, extend your primary filters life. We recommend
installing it from the beginning, but can be connected later, as necessary.
Use of the external filter could result in a reduced flow rate, based on your water
pressure, and the distance between your Water Optimizer and water source.
1. Remove the magnetic filter door from the internal filter compartment.
Diagram 2.8.1 - Remove Magnetic
Filter Door To Reveal EZ-twist Mount In Water Optimizer
2. Grab the you flushed earlier (to install in the internal slot).
Remove the bags and top cap.