9
REFRIGERATOR INSTALLATION
WARNING
WARNING
WARNING
UNPACKING YOUR REFRIGERATOR
Remove tape and any temporary labels from your
refrigerator before using. Do not remove any warning-
type labels, the model and serial number label, or
the Tech Sheet that is located under the front of the
refrigerator, behind the base grille.
To remove any remaining tape or glue, rub the area
briskly with your thumb. Tape or glue residue can also be
easily removed by rubbing a small amount of liquid dish
soap over the adhesive with your
fi
ngers. Wipe with warm
water and dry.
Do not use sharp instruments, rubbing alcohol,
fl
ammable
fl
uids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator.
NOTE:
This appliance is intended to be used in household and
similar applications such as:
•
sta
ff
kitchen areas in shops, o
ffi
ces and other working
environments
•
farm houses and by clients in hotels, motels and other
residential environments
•
bed and breakfast environments
•
catering and similar non-retail applications.
This product is not to be used for special purposes such
as the storage of medicine or test materials, or for use
on ships, etc.
Excessive Weight Hazard:
Use two or more people to move and install the
refrigerator. Failure to do so can result in back or
other injury.
Excessive Weight Hazard:
Your refrigerator is heavy. When moving the
refrigerator for cleaning or service, be sure to protect
the
fl
oor. Always pull the refrigerator straight out when
moving it. Do not wiggle or walk the refrigerator when
trying to move it, as
fl
oor damage could occur.
Explosion Hazard:
Keep
fl
ammable materials and vapors, such as
gasoline, away from the refrigerator. Failure to do so
can result in
fi
re, explosion, or death.
Refrigerator shelves are installed in the shipping position.
Shelves may need to be appropriately located after the
unit has been unpacked.
