Kenmore 790.3262 Series Use & Care Manual Download Page 5

Page: 5 / 39

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this appliance.

Save these instructions for future reference.

Read and follow the below

instructions and precautions for unpacking,

installing, and servicing your appliance:

• Remove all tape and packaging before

using the range. Destroy the carton and

plastic bags after unpacking the range.

Never allow children to play with

packaging material.

• Proper Installation—Be sure your

appliance is properly installed and

grounded by a qualified technician in

accordance with the National Fuel Gas

Code ANSI Z223.- latest edition, or in

Canada CAN/CGA B149.1, and CAN/

CGA B149.2, and the National Electrical

Code ANSI/NFPA No.70-latest edition, or

in Canada CSA Standard C22.1,

Canadian Electrical Code, Part 1, and

local code requirements. Install only per

installation instructions provided in the

literature package for this range.

• User Servicing—Do not repair or replace

any part of the appliance unless specifi-

cally recommended in the manuals. All

other servicing should be done only by a

qualified technician. This reduces the risk

of personal injury and damage to the

range.

• Ask your dealer to recommend a qualified

technician and an authorized repair

service. Know how to disconnect the

power to the range at the circuit breaker

or fuse box in case of an emergency.

• Never modify or alter the construction of

an range by removing the leveling legs,

panels, wire covers, anti-tip brackets/

screws, or any other part of the range.

• Remove the oven door from any unused

range if it is to be stored or discarded.

• For electric ignition models only--Do not

attempt to operate the range during a

power failure. If the power fails, always

turn off the range. If the range is not

turned off and the power resumes, the

range will begin to operate again. Once

the power resumes, reset the clock and

oven function.

• Cold temperatures can damage the elec-

tronic control. When using this appliance

for the first time, or when the appliance

has not been used for an extended period

of time, be sure the appliance has been in

temperatures above 32ºF (0ºC) for at

least 3 hours before turning on the power

to the appliance.

• Be sure to have an appropriate foam-type

fire extinguisher available, visible, and

easily located near the appliance.

IMPORTANT INSTRUCTIONS FOR USING YOUR OVEN

• Never use your appliance for warming or

heating the room. Doing so may result in

carbon monoxide poisoning.

• Use care when opening oven door, lower

oven door, or warmer drawer (some

models). Stand to the side of the range

when opening the door of a hot oven. Let

hot air or steam escape before you

remove or replace food in the oven.

• Keep oven vent ducts unobstructed. The

oven vent is located below the backguard.

Touching surfaces in this area when the

oven is on may cause severe burns. Do not

place plastic or heat-sensitive items on or

near the oven vent. These items can melt

or ignite.

• Do not cook food on the oven bottom.

Always cook in proper bakeware and

always use the oven racks.

Summary of Contents for 790.3262 Series








































Search results

Summary of Contents for 790.3262 Series

Reviews:

Related manuals for 790.3262 Series

Brands by name

Popular brands

Kenmore 790.3262 Series, Use & Care Manual

Search results

Summary of Contents for 790.3262 Series

Reviews:

Related manuals for 790.3262 Series

Brands by name

Popular brands