8
1 Remove door tape and empty drum
contents, including foam shipping brace
inside rubber gasket of door.
2 Using a foam corner post from the
packaging to protect the floor, carefully
lay the washer on its back.
Removing foam packaging
3 Remove styrofoam base and set it aside.
4 Carefully return the washer to an upright
position.
5 Carefully move the washer to within 4
feet (1 m) of its final location.
The drain hose is secured in place with two
plastic latching clamps. Press the locking tab
and release the drain hose.
Releasing drain hose
x 2
Installation Instructions
WARNING
SUFFOCATION HAZARD
Destroy the carton and plastic bags after
the washer is unpacked. Children might
use them for play. Cartons covered with
rugs, bedspreads, or plastic sheets can
become airtight chambers causing suf-
focation. Place all materials in a garbage
container or make materials inaccessible
to children.
CAUTION
EXCESSIVE WEIGHT HAZARD
To avoid back or other injury, have more
than one person move or lift the washer.
IMPORTANT
Save styrofoam base and shipping braces
for use to help prevent washer damage
during any future moves.
