26
Care & Cleaning (continued)
Care and Cleaning Tips
Part
Cleaning Agents
Tips and Precautions
Interior &
Door Liners
•
Soap and water
•
Baking soda and
water
•
Use two tablespoons of baking soda in one quart of warm water.
•
Be sure to wring excess water out of sponge or cloth before cleaning around
controls, light bulb or any electrical part.
Door Gaskets
•
Soap and water
•
Wipe gaskets with a clean soft cloth.
Drawers &
Bins
•
Soap and water
•
Use a soft cloth to clean drawer runners and tracks.
•
Do not wash any removable items (bins, drawers, etc.) in dishwasher.
Glass Shelves
•
Soap and water
•
Glass cleaner
•
Mild liquid sprays
•
Allow glass to warm to room temperature before immersing in warm water.
Toe Grille
•
Soap and water
•
Mild liquid sprays
•
Vacuum
•
Remove toe grille (see Installation Instructions).
•
Vacuum both sides and wipe with sudsy cloth or sponge. Rinse and dry.
Exterior &
Handles
•
Soap and water
•
Non abrasive glass
cleaner
•
Do not use commercial household cleaners containing ammonia, bleach or
alcohol to clean handles.
•
Use a soft cloth to clean smooth handles.
•
Do not use a dry cloth to clean smooth doors.
Exterior &
Handles
(Stainless
Steel Models
Only)
•
Soap and water
•
Stainless steel
cleaners
•
Never use CHLORIDE or cleaners with bleach to clean stainless steel.
•
Clean stainless steel front and handles with non-abrasive soapy water and a
dishcloth. Rinse with clean water and a soft cloth.
•
Use a non-abrasive stainless steel
cleaner. These cleaners can be purchased
at most home improvement or major department stores. Always follow
manufacturer’s instruction. Do not use household cleaners containing ammonia
or bleach.
•
NOTE
: Always clean, wipe and dry with grain to prevent scratching.
•
Wash the rest of the cabinet with warm water and mild liquid detergent. Rinse
well and wipe dry with a clean soft cloth.
Ice Chute Extension
The ice chute extension is
designed to better direct ice
flow into containers.
Removing the Ice
Chute Extension For
Cleaning
1. Turn the refrigerator off
using the button on the
control panel (refer to
the “Controls” section
of this Manual).
2. Press inward firmly on
the front of the chute
and pull down.
3. Turn your refrigerator
back on.
Push Upward Until The
Extension Snaps In Place
Pull Down
Press Here
Firmly
Installing the Ice
Chute Extension
1. Turn the refrigerator
off using the button
on the control
panel (refer to the
“Controls” section of
this Manual).
2. Align the extension
with the ice chute so
that the snap clips
are just inside the
front edge of the
chute.
3. Push upward until the extension snaps into place.
4. Turn your refrigerator back on.