background image

37

Kenmore Limited Warranty

WITH PROOF OF SALE the following warranty coverage applies when this appliance is correctly installed, 

operated and maintained according to all supplied instructions. 

One Year on Appliance 

FOR ONE YEAR from the date of sale this appliance is warranted against defects in material or 

workmanship. A defective appliance will receive free repair. If the appliance cannot be repaired it will be 

replaced free of charge.

Lifetime on Dryer Drum and Baffles

FOR AS LONG AS IT IS USED from the date of sale, a free replacement will be supplied for a defective 

dryer drum, including baffles.* If the defect appears within the first year, a new drum or baffles will be 

installed at no charge. If the defect appears after the first year, a new drum or baffles will be supplied 

but not installed at no charge. This Lifetime warranty covers only the dryer drum and baffles, and does not 

apply to any other related component or mechanism. You are responsible for the labor cost of drum or 

baffles installation after the first year from the date of sale. *Defects must be verified by a Sears authorized 

service technician.

For warranty coverage details to obtain free repair or replacement, visit the web page: 

 

www.kenmore.com/warranty

This warranty applies for only 90 DAYS from the sale date in the United States if this appliance is ever used 

for other than private household purposes.

This warranty covers ONLY defects in material and workmanship, and will NOT pay for:

1. Expendable items that can wear out from normal use, including but not limited to filters, belts, bags or 

screw-in base light bulbs.

2. A service technician to clean or maintain this appliance, or to instruct the user in correct appliance 

installation, operation and maintenance.

3. Service calls to correct appliance installation not performed by Sears authorized service agents, or to 

repair problems with house fuses, circuit breakers, house wiring, and plumbing or gas supply systems 

resulting from such installation.

4. Damage to or failure of this appliance resulting from installation not performed by Sears authorized 

service agents, including installation that was not in accord with electrical, gas or plumbing codes.

5. Damage to or failure of this appliance, including discoloration or surface rust, if it is not correctly 

operated and maintained according to all supplied instructions.

6. Damage to or failure of this appliance, including discoloration or surface rust, resulting from accident, 

alteration, abuse, misuse or use for other than its intended purpose.  

7. Damage to or failure of this appliance, including discoloration or surface rust, caused by the use of 

detergents, cleaners, chemicals or utensils other than those recommended in all instructions supplied with 

the product. 

8. Damage to or failure of parts or systems resulting from unauthorized modifications made to this 

appliance.  

9. Service to an appliance if the model and serial plate is missing, altered, or cannot easily be determined 

to have the appropriate certification logo.

Disclaimer of implied warranties; limitation of remedies

Customer’s sole and exclusive remedy under this limited warranty shall be product repair or replacement as 

provided herein. Implied warranties, including warranties of merchantability or fitness for a particular purpose, 

are limited to one year on the appliance and for as long as used on the dryer drum and baffles, or the shortest 

period allowed by law. Seller shall not be liable for incidental or consequential damages. Some states and 

provinces do not allow the exclusion or limitation of incidental or consequential damages, or limitation on the 

duration of implied warranties of merchantability or fitness, so these exclusions or limitations may not apply to 

you. 
This warranty applies only while this appliance is used in the United States.  
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 

Transform SR Brands Management LLC, Hoffman Estates, IL 60179

WARRANTY

Kenmore

 

  

®

 

Customer Care Hotline 

To schedule in-home repair service  

or order replacement parts 

Para pedir servicio de reparación 

a domicilio, y ordenar piezas  

1-844-553-6667  

www.

 

kenmore.

 

com  

 

® 

Kenmore(북미향 건조기) 111.6914#(EN).indd   31

2021-06-09   오전 10:35:39

Summary of Contents for 111.6914 Series
































Reviews: