background image

19

LIGHTS

IMPORTANT:

 The lighting system in this appliance may consist of:

 

Sealed LED modules

 

LED Bulbs

 

Incandescent Bulbs

 

Or a combination of the above.

If a Sealed LED Module(s) do not illuminate when the refrigerator 

and/or freezer door is opened, call whirlpool service for technical 

support. (See User Guide).

See "Warranty" for contact information.

IF a LED Bulb or incandescent bulb does not turn ON when the 

refrigerator and/or freezer door is opened, replace with a bulb 

recommended by Whirlpool and following the next procedure:

1. 

Unplug refrigerator or disconnect power.

2. 

Remove light cover (in some models).

NOTE:

 To clean the light cover, follow the instructions in 

REFRIGERATOR CARE section.

3. 

Remove light bulb and replace with one of the same size, shape 

and wattage, recommended by Whirlpool.

4. 

Reinstall light cover (in some models).

5. 

Plug in refrigerator or reconnect power.

NOTE: 

Not all appliance bulbs will fit your refrigerator. Be sure to 

replace the bulb with one of the same size and shape. On some 

models, the interior lights require a 40 W bulb max.

POWER INTERRUPTIONS

If the power will be out for 24 hours or less, keep the door or 

doors closed (depending on your model) to help food stay cold 

and frozen.
If the power will be out for more than 24 hours, do one of the 

following:

 

Remove all frozen food and store it in a frozen food locker.

 

Place 2 lbs (907 g) of dry ice in the freezer for every cubic 

foot (28 L) of freezer space. This will keep the food frozen for 

2 to 4 days.

 

If neither a food locker nor dry ice is available, consume or can 

perishable food at once.

REMEMBER: 

A full freezer stays cold longer than a partially filled 

one. A freezer full of meat stays cold longer than a freezer full of 

baked goods. If you see that food contains ice crystals, it may be 

refrozen, although the quality and flavor may be affected. If the 

condition of the food is poor, dispose of it.

VACATION AND MOVING CARE

Vacations

If You Choose to Leave Refrigerator On While You Are 

Away:

1. 

Use up any perishables and freeze other items.

2. 

If your refrigerator has an automatic ice maker and is 

connected to the household water supply, turn off the water 

supply to the refrigerator. Property damage can occur if the 

water supply is not turned off.

3. 

If you have an automatic ice maker, turn off the ice maker.

NOTE: 

Depending on your model, raise the wire shutoff arm to 

the Off (up) position or press the switch to Off (left).

4. 

Empty the ice bin.

If You Choose to Turn Refrigerator Off Before You Leave:

1. 

Remove all food from the refrigerator.

2. 

If your refrigerator has an automatic ice maker:

 

Turn off the water supply to the ice maker at least one day 

ahead of time.

 

When the last load of ice drops, raise the wire shutoff 

 

arm to the Off (up) position or move the switch to the 

 

Off 

(left) setting.

3. 

Unplug refrigerator.

4. 

Clean, wipe, and dry thoroughly.

5. 

Tape rubber or wood blocks to the tops of both doors to prop 

them open far enough for air to get in. This stops odor and 

mold from building up.

Moving

When you are moving your refrigerator to a new home, follow 

these steps to prepare it for the move.

1. 

If your refrigerator has an automatic ice maker:

 

Turn off the water supply to the ice maker at least one day 

ahead of time.

 

Disconnect the water line from the back of the refrigerator.

 

When the last load of ice drops, raise the wire shutoff 

 

arm to the Off (up) position or move the switch to the 

 

off setting.

2. 

Remove all food from the refrigerator and pack all frozen food 

in dry ice.

3. 

Empty the ice bin.

4. 

Unplug refrigerator.

5. 

Clean, wipe, and dry thoroughly.

6. 

Take out all removable parts, wrap them well, and tape them 

together so they don’t shift and rattle during the move.

7. 

Depending on the model, raise the front of the refrigerator so 

it rolls more easily or screw in the leveling legs so they don't 

scrape the floor. See the “Adjust the Doors” or the “Door 

Removal, Leveling, and Alignment” sections.

8. 

Tape the doors closed and tape the power cord to the back of 

the refrigerator.

When you get to your new home, put everything back and refer to 

the Installation Instructions for preparation instructions. Also, if your 

refrigerator has an automatic ice maker, remember to reconnect 

the water supply to the refrigerator.

Summary of Contents for 106.5133 Series



























Reviews: