Kendrion Kuhnke Automation GmbH
Construction and Functionality
Vico MT
33
4.3 Putting into Service
General Start-up Information
CAUTION
Risk of burns
The surface of the device may become very hot. Unprotected contact causes a risk of burning
yourself.
Avoid direct contact with the unit in operation. Put on suitable safety gloves before
touching the unit.
NOTE
Pull of the protective film to the side
The protective film on the front removes easily by pulling it off to the side.
Touch screen operation
Operate the touch screen objects by touching them with your finger or a suitable stylus.
NOTE
Damage to the touch screen by pointed or hard objects
Destruction of front
Do not use pointed or hard objects to operate the touch screen.
Avoid sudden or impact-like touch screen contact by hard objects because this may
destroy the touch screen. Touch the screen of Touch with your finger or the stylus only.
Start-up Prerequisites
Functional earth is connected.
All cables are attached properly.
Power is supplied to the unit.
Turning on the Unit
Connect the unit to the power supply.
The unit does not have an On/Off switch. Instead, it will start up automatically when you turn on the power
supply. The user interface of the operating system displays after the boot-up routine.
Turning off the Unit
You may directly unplug the unit from the power supply.
