Mechanical installation
Kendrion INTORQ | BA 14.0217 | 07/2021
45
Fig. 17:
Mounting the complete stator
A
Socket-head cap screw
B
Complete stator
C
Terminal clip
D
Rotor
E
End shield
3. Screw the complete stator to the end shield Use the supplied screw set and a torque wrench (for tight-
ening torque, refer to the table Characteristics: screw kit for brake assembly on separately screwed-on
flange, Page 24 ).
4. Remove the terminal clips and dispose of properly.
Fig. 18:
Tightening the screws with a torque wrench
