background image

 

Page | 18  

Save This Manual for Future Reference 

Warranty 

 

GENERAL: Kendall Howard offers all users of our products the following Limited Warranty against defects in material and workmanship. Please read your Warranty 

carefully. This Warranty sets forth our responsibilities in the unlikely event of defect and tells you how to obtain resoluti on.  

TERMS OF WARRANTY: Kendall Howard products are warranted to be free of defects in material and workmanship. If any part or portion of the Kendall Howard 

product fails to conform to the Warranty, Kendall Howard, at its option, will furnish new or factory remanufactured products  for repair or replacement of that part.  

WARRANTY EXTENDS TO FIRST PURCHASER FOR USE, NON-TRANSFERABLE: This Warranty is extended to the first person, firm, association, or corporation for whom 

the Kendall Howard product specified herein is originally sold for use in the United States (the "User"). This Warranty is not transferable or assignable without the 

prior written permission of Kendall Howard.  

ASSIGNMENT OF WARRANTIES: Kendall Howard assigns to User any warranties which are made by manufacturers and suppliers of components of the Kendall 

Howard product and which are assignable, but Kendall Howard makes NO REPRESENTATIONS as to the effectiveness or extent of such warranties, assumes NO 

RESPONSIBILITY for any matters which may be warranted by such manufacturers or suppliers and extends no coverage under this Warranty to such components. 

DRAWINGS, DESCRIPTIONS: Kendall Howard warrants for the period and on the terms of the Warranty set forth herein that the Kendall Howard product will 

conform to the descriptions contained in Kendall Howard final invoices, orders, proposals (as modified) and other Kendall Howard descriptive documents 

("Descriptions"). Kendall Howard does not control the use of any Kendall Howard product. Accordingly, it is understood that t he Descriptions are NOT WARRANTIES 

OF PERFORMANCE and NOT WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE.  

WARRANTY CLAIMS PROCEDURE: Within a reasonable time, but in no case to exceed thirty (30) days, after User's discovery of a defect, User shall contact Kendall 

Howard. Subject to the limitations specified herein, a Kendall Howard customer service representative will repair or replace the non-conforming Kendall Howard 

product warranted hereunder, without charge for materials. User will not be charged for labor if performed within thirty (30) days of product purchase. In all other 

instances, User will be charged for labor performed at Kendall Howard’s then current rates. Kendall Howard shall assume shipp

ing costs for replacement products 

and return of the defective product to Kendall Howard. Warranty coverage will be extended only after Kendall Howard inspection 

determines there is a defect as 

claimed 

and shows no signs of treatment or use which would void the coverage of this Warranty. 

WARRANTY PERFORMANCE OF COMPONENT MANUF

ACTURERS: It is Kendall Howard’s practice, consistent with its desire to remedy Warranty defects in the most 

prompt and effective manner possible, to cooperate with and utilize the services of component manufacturers and their authori zed representatives in the 

performance of work to correct defects in Kendall Howard components. Accordingly, Kendall Howard may utilize third parties in the performance of Warranty work, 

including repair or replacement hereunder, where, in Kendall Howard’s opinion, such work ca

n be performed in less time, and with less expense.  

ITEMS NOT COVERED BY WARRANTY: THIS WARRANTY DOES NOT COVER DAMAGE OR DEFECT CAUSED BY misuse, improper application, wrong or inadequate 

electrical current or connection, negligence, inappropriate on site operating conditions, repair by non- Kendall Howard designated personnel, accident in transit, 

tampering, alterations, a change in location or operating use, exposure to the elements, Acts of God, theft or installation contrary to Kendall Howard's 

recommendations or specifications, or in any event if the Kendall Howard serial number has been altered, defaced, or removed. THIS  WARRANTY DOES NOT COVER 

installation costs, external circuit breaker resetting or maintenance or service items and further, except as may be specifically provided for herein, does NOT include 

labor or shipping costs arising from the repair or replacement of the Kendall Howard product, or any part thereof, or charges to remove same from any premises of 

User. THIS WARRANTY IS VOID if User alters the product in any way.  

LIMITATIONS: THIS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND  FITNESS FOR A 

PARTICULAR PURPOSE. USER'S SOLE AND EXCLUSIVE REMEDY IS REPAIR OR REPLACEMENT OF THE KENDALL HOWARD PRODUCT AS SET FORTH HEREIN. IF USER'S 

REMEDY IS DEEMED TO FAIL OF ITS ESSENTIAL PURPOSE BY A COURT OF COMPETENT JURISDICTION, KENDALL HOWARD’S RESPONSIBILITY FOR P

ROPERTY LOSS OR 

DAMAGE SHALL NOT EXCEED ONE TIMES THE NET PRODUCT PURCHASE PRICE. IN NO EVENT SHALL KENDALL HOWARD ASSUME ANY LIABILITY FOR INDIRECT, 

SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES OF ANY KIND WHATSOEVER, INCLUDING WITHOUT LIMITATION LOST PROFITS, BU SINESS 

INTERRUPTION OR LOSS OF DATA, WHETHER ANY CLAIM IS BASED UPON THEORIES OR CONTRACT, NEGLIGENCE, STRICT LIABILITY, TORT, OR OTHERWISE.  

MISCELLANEOUS: NO SALESPERSON, EMPLOYEE OR AGENT OF KENDALL HOWARD IS AUTHORIZED TO ADD TO OR VARY THE TERMS OF THIS WARRANTY. Warranty 

terms may be modified, if at all, only in writing signed by a Kendall Howard officer. This Warranty is effective as of the date of Kendall Howard receipt  of full 

payment and supersedes all previous warranties Kendall Howard reserves the right to supplement or change the terms of this  Warranty in any subsequent warranty 

offering to User or others. If any provision of this Warranty should be or becomes invalid and/or unenforceable during the wa rranty period, the remaining terms 

and provisions shall continue in full force and effect. User must complete the attached User Information Card and forward it to Kendall Howard within thirty (30) 

days of receipt of the Kendall Howard product. This Warranty is given in and performance hereunder is to be construed under the laws of the State of Nebraska. 

This Warranty represents the entire agreement between Kendall Howard and User with respect to the subject matter herein and s upersedes all prior or 

contemporaneous oral or written communications, representations, understandings, or agreements relating to this subject. 

Summary of Contents for ESD-EVH-1000



















Reviews: