www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United Stateswith more than 50% of the component cost of US origin It may be covered by patents
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
1
INSTALLATION INSTRUCTIONS
F-2397
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions
should always be followed, including the following:
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE
APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH
THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND
THE HAZARDS INVOLVED. DISCONNECT POWER TO ALL CIRCUITS
BEFORE WIRING FIXTURE. INSTALL IN ACCORDANCE WITH
ALL NATIONAL, STATE, AND LOCAL CODES. DO NOT CONNECT
TO AN UNGROUNDED SUPPLY. READ ALL FIXTURE MARKINGS
AND LABELS TO ENSURE CORRECT INSTALLATION OF FIXTURE.
SUPPLEMENTAL INSTRUCTIONS MAY BE LOCATED ON THE
FIXTURE, IN ADDITION TO THIS INSTRUCTION SHEET, REGARDING
ORIENTATION, OR MOUNTING RESTRICTIONS.
SAVE THESE INSTRUCTIONS
INSTALLATION INSTRUCTIONS
MEDMASTER
™
Patient Room Luminaires
• Read all fixture markings and labels to
insure correct installation located on the
fixture, separate from this instruction
sheet, regarding orientation and
mounting restrictions.
• Disconnect power to main circuits before
wiring fixture.
• Undo center reflector and wire way cover
to gain access to the inside of the fixture
(also refer to F-2398 for diffuser operation).
• Attach conduit to wiring hole.
• Connect fixture leads to power supply leads
using connectors suitable for the gage and
number of wires being used (not included).
Connections are to be made in the junction box,
not the fixture. Black and other colored wires
connect to the supply\ conductor, white fixture
lead connects to the neutral supply conductor,
and the grounding wire must be connected to a
suitable ground.
• Fasten wire way cover and center reflector.
MAC2B SERIES – LF GRID MOUNT
