Memory Scope
Instruction Manual
T-1955
T-1957
Page 1: ...Memory Scope Instruction Manual T 1955 T 1957 ...
Page 2: ...Options 1 OSD default is ON leave alone ON OFF 2 Area default is USA can reset to Asia or Europe 3 Date should maintain once set 4 Time should maintain once set 5 Backup default is ON normally leave on 6 Call Record Interval default is 010 7 Overwrite default is OFF If Overwrite is ON system will record any new images on top of existing images erasing old image This system is only active when syst...
Page 3: ...e b Push Delete button Screen will appear with following choices 1 All Forward 2 One Backward 3 Last Delete Exit Setup Meanings of these terms 1 All Forward In this mode you can erase all the recorded and saved images To Erase ALL Press PLAY button middle or third button from top screen will show the word Format blinking in the upper right corner Press the PLAY button again screen will now show Fo...
Page 4: ...connection and Applied Vision Software Please see the Applied Vision Software booklet that came with your microscope Recording Images saved on your microscope to your computer Using the PLAY and PLAY buttons bring up images one at a time and with Applied Vision Software running click on the take a snapshot function and the image will be moved to the Applied Vision Software and may be saved on your...
