background image

Promig 530 / 061 – 

© kemPPi oy

1 2 3 4  5 6 7 8 9 10

1 2 3 4  5 6 7 8 9 10

1 2 3 4  5 6 7 8 9 10

1 2 3 4  5 6 7 8 9 10

1 2 3 4  5 6 7 8 9 10

6. Automatic remote -> local switching with MC, ML and MX panel

Remote -> local switching works, when remote controller is taken away
Remote -> local switching is off

7. Hot start function with MC and ML panel

No hot start, on delivery
Hot start selected

8A. Crater filling in 4T with synergic MIG / PULSMIG, ML-panel only

8B. Selection of 2T or 4T with ”no panel”

8C. Selection of crater filling with MC panel

8D. MX-panel selecto restores U-pot. value

ML/MC-panel: No crater filling, on delivery
MX-panel selecto does not restore U-pot. value (fine control active)
2T MIG without panel

ML-panel: Crater filling in 4T with synergic PULSMIG/MIG
MC-panel: Crater filling in 4T
MX-panel selecto restores U-pot. value (no fine control)
4T MIG without panel

9A. Selection of synergic MIG / pulsed MIG, ML-panel

9B. Selection of plate thickness / amperage display, MX-panel

Fe synergic PULSMIG / MIG in ML panel, on delivery
Plate thickness display is on with MX-panel
AlSi synergic PULSMIG / MIG in ML panel instead of Fe.
Extra label needed to change Fe text to AlSi text
Amperage display is on with MX-panel

10. Selection of max wire feed speed

Max. speed 18 m/min, on delivery
Max. speed 25 m/min

Summary of Contents for Promig 530





































Reviews: