Kemppi KEMPACT, Operation Instructions Manual, Page: 12 / 17

1 – Kempact™ pulse 800 mVu automotiVe / 0709 © Kemppi oy
Parameter Name Nr Display 1-MIG Pulsed
MIG
Factory
value
Unit Explanation
PostGasTime 1 pog x x Curve s postgas time 0.0…9.9 s
PreGasTime 2 prg x x Curve s pregas time, functions by
2t 0.0…9.9 s
HotStartLevel 11 hot x x 30 % hot start ratio to welding
power 50…+75%
HotStartTime 2T 12 h2t x x 2 s 2t hot start timer 0.1-9.9 s
CraterFillLevel 14 Cfl x x 30 % welding end level 10-90 %
CraterFillSlope 15 Cfs x x 1 s/10m wire slowing-down
1…20 s/10m
CreepStartLevel 17 Csl x x syn wire speed start value
10…90
CreepStartSlope 18 Css x x 0 s/10m wire speed up time
0.1…5 s/10m
DoubleFrequency 21 dfr - - - - -
DoubleAmpiltude 22 da - - - - -
StartPower
31 stp x x 0 start power control
-9…0…+9
PulseCurrent 33 puC x 0 % pulse top current control
10…+15%
ArcLength
AdjRange
41 alr x x 0 % arc length adjustment
range 50…+75%
Calibration
42 Cal x x 1 v/100a setting mid value of arc
length fine adjustment
0.0…10.0 v/100a
wFS 51 fs 18 m/min wire feed maximum
18 or 25 m/min
Gun 53 gun on liquidcooled thermal
protection on/off
GunRemote
54 gre on Disabling of gun remote
control automatic
identification
Display reset
time
81 dly x x 5 s 1...20 s
PRG INFO - feeld
selection
82 dis x x 1 1,2,3
Restore 99 faC x off Restoring factory settings
(off=no reset,
pan=panel and setup
all= also memory
channels)
Setup functions on pulse panel