Kemppi A7 TIG Orbital System 300, Operating Instructions Manual, Page: 31 / 48

31
A7 TIG Orbital System 150 © Kemppi Oy 2016 1615
OPERA
TING M
ANU
AL
3.8.18 Printing welds
On the Print Weld Files screen you can print to the built‐in
paper tape printer and/or an internal memory location.
Printing to the printer provides an immediate hard copy
of the weld program. You can print weld programs to
memory one or more times over a period of time and then
download them to a memory stick for storage or transfer
them to other electronic media. The contents of memory
will be deleted.
1. On the Maintenance Menu, select Print Welds .
2. Select Weld To Print .
3. Using the control knob, enter the weld number to
print.
4. Select Print or Store File .
5. Use the control knob to select: Memory , Printer , or
Both .
6. Select Short Form (parameters only) or Long Form
(parameters, as well as all procedure information
and notes).
7. To save the settings that have been changed on the
Maintenance / Print Weld Files screen, press Save .
Memory Internal memory
Print Transfer files for printing to integrated printer
or transfer to memory stick for printing using
a PC.
Automatic
Printout
If set to Yes, the printout automatically occurs
following each weld.
3.8.20.1 Transferring print files to memory stick
You can use a memory stick to transfer or move files to
a standard PC equipped with a printer for later printout.
1. Select the weld number to transfer and use the
control knob to select Print to Memory , Print , or
Both .
2. Press Print . A screen will state that the weld has
been successfully saved to memory.
3. Save one or more welds to print later. (The memory
stick does not have to be installed at this time.)
To transfer a weld program from internal memory to a
memory stick:
1. Place the stick in the USB port in the front panel.
2. The stick will require approximately 1 minute to
initialize, at which time the LCD on the side of the
key will slowly pulse.
3. When the stick is ready, the LCD blinks rapidly 5
times.