26
A7 TIG Orbital System 150
© Kemppi Oy 2016
1615
OPERA
TING M
ANU
AL
Example
You wish to change the amperage originally programmed
in Level 4 of a one pass weld. However, other parameter
changes occur in a subsequent level, such as level 5 or 6.
If you make the change in amperage in Level 4 and press
Next
, you will automatically copy all of the Program Level
4 values into Level 5. Therefore, note any other changes
that are occurring in subsequent levels within the pass
before modifying any parameter in that pass. This is only
true for Level parameters within any given pass. For a
multi‐pass weld, once you move to a subsequent pass,
the parameters will not be copied from the previous pass.
Pass 1, Level 2
Move the cursor and enter values with the control knob
and press
Next
, or if no change is necessary, just press
Next
.
Pass 1, Level 3 to Final Level
Continue moving through the screens for each level and
change parameters as needed