18
A7 TIG Orbital System 150
© Kemppi Oy 2016
1615
OPERA
TING M
ANU
AL
3.8.1 Start-up
When the control is first turned on the main display will
remain off except for backlighting. After approximately
12 seconds the model, S/N, software release date, and last
calibration date appear on the display.
3.8.2 Main screen/Menu
Four soft keys on the main screen allow access to:
1. Library of existing procedures
2. Help with detailed explanation of highlighted item
3. Menu that provides access to various functions and
system configuration
4. New to create a new weld program.
Library
Programs are listed. Use the up/down cursor to scroll
through programs. Select program with Select (soft key).
Library displays the following choices:
• Weld Number XX
• Run
• Review Parameters
• Review Notes
• Edit Weld
Scroll through the list to make your selection.
To run, review, and edit existing program in Library
Move cursor to desired program and press
Select
.
Only weld numbers 001 to 099 are in use to store
programs in internal memory. Weld number 100 and above
are used when exporting weld programs to another power
source.
To run a weld in Library
1. Move cursor to
Run
(highlighted in red). Press
Select
.
Also use cursor and
Select
to Review Parameters, Review
Notes, and Edit Weld.