KEMPER ProfiMaster Manual
EN
Art. No.: 150 2121
- 3 -
Rev.:
1
Subject to technical modifications and errors.
Issued: 10/2013
2 Safety
2.1 Basics
The ProfiMaster is designed and built with state-of-the-art technology and according
to the recognized safety rules. When operating the ProfiMaster, danger to the
operator or damage to the ProfiMaster and other property may occur if it is:
−
used by untrained personnel or personnel which has not been instructed,
−
not used as intended and/or
−
improperly serviced
2.2 Information on signs and symbols
DANGER
G
This is a warning of a potentially dangerous situation with an inevitable
consequence of severe injury or death if the specified statement is not
followed exactly.
WARNING
Indicates a potentially hazardous situation that could result in severe
personal injury or death if the specified statement is not followed
exactly.
TAKE CARE
This is a warning of a possible hazardous situation, with the result of
minor or moderate injury or property damage if the specified statement
is not followed exactly.
NOTE
This is a reference to useful information for safe and proper use.
•
Working and/or operating steps are marked by a bullet point. The steps
are to be executed in order from top to bottom.
−
Enumerations are indicated by a dash