Kemper PROFILER Remote, Quick Start Manual

Page: 16 / 132

16 PROFILER QUICKSTART
Morphing is explained in detail in the Main Manual plus there are
also tutorial videos dedicated to this subject available on:
www.kemper-amps.com/video
MORE FUN WITH PEDALS
Here a few tips related to linking and checking pedal controllers:
Press the SYSTEM button to access several pages of global
settings. These are settings that don’t vary by Rig. Use the <PAGE>
buttons to navigate through these pages.
Locate the “Pedal Links” page. This page helps you ensure that
all your pedals are set up properly. It shows the “levels” of all
pedal controllers. Moving a pedal results in a change of the
corresponding pedal controllers on screen. No movement on
screen means that there is an issue with either the cable, the
controller assignment of the pedal, or the pedal itself.
Details on the assignments can be found in the Main Manual and a
tutorial video available on:
www.kemper-amps.com
SYSTEM RIG QUICK
STORE
TYPE BROWSE
EXIT
PERFORM
TUNER
PROFILER
BROWSER
VOL GAIN
HEADPHONE
UNDO REDO PAGE