Kemper PROFILER Remote, Quick Start Manual

Page: 15 / 132

15 PROFILER QUICKSTART
MORPH PEDAL
Morphing allows you to change any number of continuous
parameters like Gain level, Delay Mix or Delay Feedback
simultaneously – all with a single expression pedal. Moving the
pedal is equivalent to turning all those knobs at the same time to
move between one sound and another. We distinguish between
these two sounds with the terms “Base Sound” and “Morph
Sound”. Here’s a simple application:
The expression pedal used to control wah effects (as described in
the previous paragraph) is already primed to control Morphing as
well.
First, move the pedal to heel position. Turn the GAIN knob to
select the intended level for your Base Sound.
Move the pedal to toe position. Turn the GAIN knob and select the
intended level for your Morph Sound.
Now, your Morph Pedal changes the gain continuously between
the values associated with the Base and the Morph Sounds.
To continue, add the next continuous parameter you’d like to
morph. Don’t forget to store the Rig to keep all the changes you’ve
made.
GAIN
GAIN
GAIN