K410068602008-00 / 09.2018
28
3.1.2.7 Valve manual mode
With the KHS Mini Control System -
MASTER 2.0-, it is possible to run a
function test of the valves using the
"Valve
manual
mode"
submenu.
Furthermore, the valves can be
individually
addressed
during
maintenance. The functions are shown in
the following illustration.
Maintenance:
A function test is recommended after configuring the "Device settings"
submenu to rule out possible errors immediately.
Valve manual mode
Select system crtl.
Automatic mode
Open
Closed
3.1.2.8 Network setup
To establish a connection between the PC
and the KHS Mini Control System -
MASTER 2.0-, the required network
configurations can be set up in the
"Network setup" submenu.
Connection
Description
PC
↔
MASTER
The IP addresses of the two devices should not differ greatly
from each other.
PC
↔
LAN
↔
MASTER
You can obtain the appropriate parameters for integration
into your network from your system administrator
The following parameters are configured as factory defaults:
IP-Adresse: 10.1.23.150
Subnet: 255.255.255.0
Gateway: 10.1.23.1
Summary of Contents for KHS Mini Control System MASTER 2.0
Page 7: ...K410068602008 00 09 2018 7...
Page 77: ...K410068602008 00 09 2018 77...
