Kemper EVOLUTION LINE, Operating Manual

Page: 128 / 204

Operation
120
EVOLUTION LINE roll machine Emil Kemper GmbH
7.4.8 Setting the conveyor belt
Configuration of the line module Conveyor belt in the line is displayed in section
"5 Overview of the line".
7.4.8.1 Setting a recipe at the conveyor belt
Note!
The input box B
OTTOM BELT
is accessible after pressing the P
ARAMETER
button in the main menu of the respective assembly (see section
"7.3 Setting assemblies")!
In the input box B
OTTOM BELT
, you can change the speed of the conveyor belt in the
respective assembly:
The following illustration displays a menu excerpt of an assembly with the input box
B
OTTOM BELT
:
1
Touch the input box B
OTTOM BELT
(1).
A keypad appears for entering numbers.

Enter the speed (rotary frequency).

Confirm your entry via the keypad.

Press the button to save your settings in the displayed recipe.
Password level 7 is required for saving.

Press the button to open the start screen.
Hz
Top belt option
Top belt
Hz
Bottom belt
000,0
Off
000,0