Kemper EVOLUTION LINE, Operating Manual

Page: 118 / 204

Operation
110
EVOLUTION LINE roll machine Emil Kemper GmbH
Pull the centering flap (1) off the holder by the
handle (2) in the direction of the arrow (3).
Fit the new centering flap (1) in the holder in
the direction of the arrow (2), ensuring that the
slots in the centering flap engage in the holder.
Ensure that the index pin (3) engages in the
holder.
7.4.5.2 Setting a recipe at the centering unit
Note!
The menu-item "Centering unit" can be accessed in the main menu of the
respective assembly after pressing the P
ARAMETER
button (see section
"7.3 Setting assemblies")!
In the menu item 'Centering unit' , you can change the settings of the centering unit in the
respective assembly.
Note!
After touching the input boxes, a keypad appears for entering numbers.
Confirm your entry via the keypad