Kemper EVOLUTION LINE, Operating Manual

Page: 117 / 204

Operation
Emil Kemper GmbH EVOLUTION LINE roll machine
109
7.4.4 Setting the roll-out roller
Configuration of the line module Roll-out roller in the line is displayed in section
"5 Overview of the line".
7.4.4.1 Adjusting the height of the roll-out roller
Turn the adjusting wheel (1)
–
clockwise (2) to increase the height of the
roll-out roller,
–
anti-clockwise (3) to decrease the height of
the roll-out roller.
The setting can be read on the scale (4).
7.4.5 Setting the centering unit
Configuration of the line module Centering unit in the line is displayed in section
"5 Overview of the line".
7.4.5.1 Replacing the centering flap
Pull the index pin (1) from the centering flap (3)
in the direction of the arrow (3).
Turn the index pin (1) 90 degrees in the
direction of the arrow (4).