Manual KHS Mini System Control MASTER
42
11. Accessories
Tab. 11.1 Optionally available accessories
Optionally available accessories
FIGURE
KHS Isolating valve with servo drive 230 V
686 04
KHS Isolating valve-plus with spring-reset servo drive (230 V)
686 05
KHS drain with overflow monitor
688 00
KHS temperature sensor fitting PT 1000
628 0G / 629 0G
KHS flow measurement valve
638 4G / 138 4G
Leakage water sensor
620 00 001
12. Wiring instructions for components with electrical connection
Tab. 12.1 Wiring instructions for components with electrical connection
Designation
For KEMPER
order no.
Cable cross-
section
mm²
Max. cable
length
m
Cable type*
KHS Isolating valve-plus with spring-
reset servo drive (230 V)
68605015…032
69605015
3 x 1.5²
9500
NYM-J 3 x 1.5mm²
KHS Isolating valve with servo drive
(230 V)
68604015…032
69604015
4 x 1.5²
9500
NYM-J 4 x 1.5mm²
KHS drain with overflow monitor
68800020...032
2 x 0.25²
150
J-Y(ST)Y 1x2x0.6mm²
or NYM-J 3x1.5mm²
Kemper Control-plus
Flow measurement valve Vortex
principle
6384G015…025
1384G015…050
7 x 0.34² **
300
J-Y(ST)Y 4x2x0.6mm²
KHS temperature sensor fitting PT
1000
6280G015...050
6290G015...050
4 x 2 x 0.6
10,000
J-Y(ST)Y 4x2x0.6mm²
CAN bus cable'***
The application is based on the ISO
11898 international standard.
68602005
68602006
1 x 2 x 0.25² ... 0.34²
1 x 2 x 0.34² ... 0.5²
1 x 2 x 0.50² ... 0.6²
1 x 2 x 0.75² ... 0.8²
0 m … 40 m
40 m … 300 m
300 m … 600 m
500 m … 1000 m
CAN bus cable
Leakage water sensor
6200000100
2x0.75²
0-50
50-500
Standard cable
UL-LIYCY
* Possible cable type for fixed routing
** Shielded cable supply lin
e
Version: 21/11/2013
*** (To be provided by construction site)
