11
Fixing screw
Fixing plate
7. How to use
When measuring WBGT with this product in hand,
try to keep the main
unit away from the operator’s
body as far as possible.
* When the operator’s body is so close to the
temperature/humidity sensor unit that the heat of
the body may affect the sensor, resulting in
incorrect readings.
When installing this product on a wall, first secure
the fixing plate on the wall with screws, then, install
this product on the fixing plate with the fixing
screw for mounting a tripod.
* Secure the fixing plate firmly so as not to fall off.
* Screws for mounting the fixing plate are not
included.
When mounting this product on a tripod, secure the
fixing screw for mounting a tripod into the
mounting hole at the bottom of this product.
* Be sure to mount this product with the glove
upwards.
* A tripod and a screw for mounting a tripod are
not included with this product.
Measurement in hand
Measurement by installing on a wall
Measurement by mounting on a tripod
30
mm
4
mm
*8
mm
Long round hole