Kelly W36, Operating Instructions Manual

Page: 32 / 46

32
Chain mount arm height adjustment
• Use the tractor hydraulics to raise the frame or chain mount plate that requires adjustment.
• Position a suitable block or stand to support the arm (Fig 27.1)
• Using the tractor hydraulics, lower the machine until the height adjusting chains are loose.
• Remove spring retaining clip (Fig 27.2).
• Slide chain links through slot in lifting arm, turn links 90 degrees for fine adjustment.
• Lift Frame and install retaining clip (Fig 27.3).
• Remove stand.
Fig 27.1. Fig 27.2.
Fig 27.3.
Dropleg height adjustment
• Release wing tension by opening the tension isolation valve (Fig 14)
• Move spacers to bottom of dropleg to decrease ground clearance (Fig. 28).
Dropleg
Spacer
Fig 28.