Kellfri 35-XKH145, Instructions Manual, Page: 15 / 36

15
Table of Contents >>
SERVICE INTERVAL MEASURE
Flails Before each use Replace all defective flails. Sharp blades
give better results. When replacing blades,
tighten bolts fully.
While operating Listen out for noises
After each use Check
Gearbox Before each use Check level of oil type: Transmission oil
(approx. 1.2 L)
50 operating hours First oil change
100 operating hours or a
minimum of once a year
Oil change
Rotor After 20 hours of operation Lubrication
Belts After 1 hour of operation
Regularly
Check and tighten belt. The belt should
move 20 mm under pressure.
The equipment After each use Wash off earth and grass with water.
Lubrication The first time after
2 hours of operation.
After 20 operating hours
Lubricate all points regularly.
The illustration shows 35-XKH185