background image

8

← 

Table of Contents

SYMBOL

EXPLANATION

SYMBOL

EXPLANATION

SYMBOL

EXPLANATION

Read the instruction 

manual before start-

ing work!

STOP

WARNING! Risk of 

crushing! Do not 

open the guard 

before all moving 

parts have stopped. 

Warning: rotating 

PTO shaft - crushing 

risk!

25 m

Ejection warning - 

keep your distance!

Respect the equip-

ment’s risk zone 

- 25 m

WARNING! Risk of 

crushing!

There must be no one 

standing behind the 

tractor/towing vehicle 

while the machine/

equipment is being 

attached or detached.

WARNING! Be aware 

that parts of the 

machine may be hot 

after use!

Risk of burns.

WARNING! Rotating 

blades! Do not 

put your hand or 

any other part of 

your body into the 

machine while it is 

running!

WARNING! No one is 

allowed in the vicinity 

of the machine during 

operation! Do not climb 

on the machine!  

WARNING! Risk of 

crushing! Do not per-

mit anyone to stand 

under suspended 

loads!

Risk zone! Keep your 

distance!

WARNING! Crushing 

risk!

Keep your dis-

tance!

WARNING! Danger-

ous oil pressure! 

Oil under pressure 

can penetrate the 

skin. Seek medical 

attention if this 

occurs

DANGER! Do not 

allow children in 

the vicinity of the 

machine during 

operation! If there 

are children in 

the area, they 

must be kept 

under supervi-

sion!

IMPORTANT! 

Always check 

the belt tension. 

Carry out checks 

and maintenance 

regularly!

IMPORTANT! Store 

the machine or 

equipment under a 

roof, or cover it with 

a tarpaulin when 

not in use. Prolong 

the service life of 

your machine. Do 

not expose it to 

rain, sun or snow.

IMPORTANT! 

Always check the 

oil level in the 

machine’s engine 

and gearbox.

IMPORTANT! 

Grease moving 

parts regularly.

Recycling! The 

product can be re-

cycled. It should be 

taken to a recycling 

station.

Product is

CE marked.

Summary of Contents for 35-FMF275

























Reviews: